How to Keep Your Fan Filter Unit Clean and Efficient with Exit Filter.
Fan filter unit, or FFU, is a type of device that is used to provide clean and filtered air to a specific area, such as a clean room, a laboratory, or a production line. FFU consists of a fan, a filter, and a housing. The fan draws the air from the environment and passes it through the filter, which removes the dust, particles, and contaminants from the air. The filtered air then exits the housing and enters the target area.
However, over time, the filter can become clogged and dirty, which can affect the performance and efficiency of the FFU. The clogged filter can reduce the air flow and pressure, increase the noise and vibration, and consume more energy. Moreover, the dirty filter can also release the trapped contaminants back into the air, which can compromise the cleanliness and quality of the target area.
That’s why you need an exit filter for your FFU. An exit filter is a type of accessory that is attached to the outlet of the FFU housing. It acts as a secondary filter that can catch any residual dust, particles, or contaminants that may escape from the primary filter. It can help to keep your FFU clean and efficient in many ways, such as:
- It can extend the service life and reduce the maintenance cost of your FFU, as it can prevent the primary filter from getting clogged and dirty too quickly.
- It can improve the performance and efficiency of your FFU, as it can maintain the optimal air flow and pressure, reduce the noise and vibration, and save energy.
- It can enhance the cleanliness and quality of your target area, as it can ensure that no contaminants are released into the air.
However, not all exit filters are created equal. If you want to keep your FFU clean and efficient with an exit filter, you need a high-quality exit filter that can handle the challenges of your FFU project. That’s where Leipole comes in.
Leipole is a leading manufacturer and supplier of exit filters, with more than 20 years of experience and expertise in this field. Leipole offers a variety of exit filters to suit different FFU models and sizes, such as:
- FK9923 exit filter: This is an exit filter that is compatible with FK9923 FFU model. It has a size of 1170mm x 570mm x 69mm. It has a filtration efficiency of 99.99% for particles of 0.3 microns or larger. It has a low initial resistance of 220 Pa.
- FK9925 exit filter: This is an exit filter that is compatible with FK9925 FFU model. It has a size of 1170mm x 1170mm x 69mm. It has a filtration efficiency of 99.99% for particles of 0.3 microns or larger. It has a low initial resistance of 220 Pa.
- FK9926 exit filter: This is an exit filter that is compatible with FK9926 FFU model. It has a size of 575mm x 575mm x 69mm. It has a filtration efficiency of 99.99% for particles of 0.3 microns or larger. It has a low initial resistance of 220 Pa.
Leipole’s exit filters have many advantages over other brands, such as:
- They are made of high-quality materials and advanced technology, to ensure the optimal performance and reliability of the exit filters.
- They are easy to install and replace, as they have a snap-on design that can fit securely on the outlet of the FFU housing.
- They are tested and certified by professional institutions, to guarantee the quality and safety of the exit filters.
- They are customized according to the specific requirements of customers, to provide the best solution for each FFU project.